PROTEON, INC.

PRONET-4/16 MODEL P1390

NIC Type      Token-Ring
Transfer Rate 4/16Mbps
Data Bus      16-bit ISA
Topology      Ring
Wiring Type   Unshielded twisted pair

              Shielded twisted pair
Boot ROM      Available

[Image]

                                 BOOT ROM

                 Setting                                JP1

  »               Disabled                            Closed

                   Enabled                             Open

                                  INTERRUPT REQUEST

  IRQ   JP2A     JP2B     JP2C     JP2D     JP2E    JP2F     JP2G     JP2H     JP2I

  2/9   Open     Open     Open    Closed    Open    Open     Open     Open     Open

  3     Open     Open     Open     Open     Open    Open     Open     Open     Closed

  4     Open     Open     Open     Open     Open    Open     Open     Closed   Open

  5     Open     Open     Open     Open     Open    Open     Closed   Open     Open

  6     Open     Open     Open     Open     Open    Closed   Open     Open     Open

  7     Open     Open     Open     Open    Closed   Open     Open     Open     Open

  10    Open     Open    Closed    Open     Open    Open     Open     Open     Open

  11    Open    Closed    Open     Open     Open    Open     Open     Open     Open

  12    Closed   Open     Open     Open     Open    Open     Open     Open     Open

                         SA ADDRESS ENABLE (SAEN)

                  Mode                                  JP3

  »              SAEN enabled                          Closed

                SAEN disabled                           Open

  Note:The SAEN jumper is provided for systems that are not 100% ISA
  compatible. If the you get a DMA data error or if the card fails to
  initialize, you should disabled SAEN.

                                 I/O BASE ADDRESS

  Address     JP4A     JP4B     JP4C     JP4D    JP4E     JP4F     JP4G     JP4H

      0120h  Closed   Closed   Closed   Closed   Closed   Closed   Closed   Open

      0220h  Closed   Closed   Closed   Closed   Closed   Closed   Open     Closed

      0320h  Closed   Closed   Closed   Closed   Closed   Closed   Open     Open

      0420h  Closed   Closed   Closed   Closed   Closed   Open     Closed   Closed

  »   0A20h  Closed   Closed   Closed   Closed   Open     Closed   Open     Closed

      FC20h   Open     Open     Open     Open    Open     Open     Closed   Closed

      FD20h   Open     Open     Open     Open    Open     Open     Closed   Open

      FE20h   Open     Open     Open     Open    Open     Open     Open     Closed

      FF20h   Open     Open     Open     Open    Open     Open     Open     Open

  Note: A total of 255 I/O address settings are available. The switches are a
  binary representation of the two most significant digits in the Hexadecimal I/O
  address, the two least significant bits are set at 0020h. JP4H is the Least
  Significant Bit and JP4A is the Most Significant Bit. The jumpers have the
  following decimal values: jumper H=1, G=2, F=4, E=8, D=16, C=32, B=64, A=128.
  open the jumpers and add the values of the open jumpers. Convert that number to
  a hexadecimal number, and use it as the two left most digits in the numer
  "xx20h". If using Banyan VINES network, the I/O addresses are limited to the
  range between and including 0120h to 0F20h.

                                DMA CHANNEL

       Channel          JP5A & JP5B       JP5C & JP5D       JP5E & JP5F

  »       DMA5             Open              Open             Closed

          DMA6             Open             Closed             Open

          DMA7            Closed             Open              Open

                                 DMA CLOCK

       Speed           JP6A          JP6B          JP6C          JP6D

  »    Bus speed       Open          Open          Open         Closed

         4MHz          Open          Open         Closed         Open

         8MHz          Open         Closed         Open          Open

         16MHz        Closed         Open          Open          Open